Projects and presets
Presets (in this browser)
Apply Save as preset Save changes Delete
A preset saves the sizes and options, without the logo. To keep saving one of your presets, choose it and press «Save changes». Also, your latest work is saved automatically in this browser and comes back when you open the page.
Projects (in your account)
Sign in to save projects: everything is saved, including the SVG logo.
Shape and size
Light box
Infinity mirror Expert
Corner radius (mm)
Infinity mirror
It goes on the wall. From back to front: the back, a mirror, the spacer with the LED strip facing the centre, a two-way mirror acrylic and the closing ring. The light bounces between the two mirrors and you see a never-ending tunnel.
Gap between mirrors (mm)
Back mirror thickness (mm)
Front two-way mirror thickness (mm)
The logo and text
On the front
Lit, inside
They are glued on top of the two-way mirror. The SVG includes their outline, in case you prefer vinyl or engraving.
Each shape comes out hollow and open at the back: glue it on the back mirror with a piece of LED strip inside and it repeats in the tunnel. Print it in translucent filament.
Height of the logo on the front (mm)
Height of the lit logo (mm)
How it hangs
Download the template and stick it on the wall with a level. If you do not print it, measure: the two screws go — apart and — below the top edge.
Drill at the two crosses and fit wall plugs and 4 mm screws, with an 8 mm head at most.
Leave the head — out of the wall.
Put both heads through the large holes on the back and lower the sign 10 mm: it hangs and will not come off.
The cable comes out at the bottom. Press «See the back» in the view to see it.
Drilling template (SVG, real size)
Faces and mounting
Double sided
Single sided
How it hangs
Flat on the wall
From the ceiling
Double sided: it comes off the wall with an arm. The base screws to the wall and the ring slides down the dovetail.
Where the LED strip goes
On the edge
Central plate Expert
The strip goes inside the ring facing the centre. It is the simplest, but the edges end up brighter than the centre.
Cable hole (mm)
The face
Acrylic
Translucent printed
Acrylic thickness (mm)
Logo and text on the face
Inlaid
Raised
In the same layers as the face: for multicolour printers.
How the face is held
Bayonet (twist)
Press-fit frame
The bayonet only exists on round ones: square and rectangular ones use a press-fit frame.
The frame goes inside the ring and clicks into a groove. To remove it, put a fingernail or a flat screwdriver in the notch at the bottom.
Text on the face
With the printed face, the text comes out as a separate piece of the same thickness: on multi-colour printers you load both and give each its filament. With acrylic, the text goes in the SVG to engrave it or cut it in vinyl.
Your logo Expert
How to prepare the SVG: shapes filled with flat colour, text converted to curves, no gradients or shadows, lines converted to outlines and details of 0.8 mm or more. Each colour comes out as a piece inlaid in the face.
The light
Light colour (for the preview)
Strip width (mm)
The strip is stuck inside the ring, facing the centre: it lights both faces equally.
Preview colours
This light box uses Expert plan features (infinity mirror, SVG logo or central plate). Viewing it in 3D is free; downloading it needs Expert.
Download all the pieces (STL)
The ring
The closing rings
The wall base
The central LED plate and its spacer
The mirror spacer
The logo and text
The translucent face
The text (second colour)
Face and colours aligned, for multicolour (ZIP)
Face with the relief in one piece, for a pause (STL)
The acrylic face to cut (SVG)
Each piece comes out in its print position, with no supports. The back closing ring and the back face are already flipped.